Hot feed
This type of extruders must be fed with pre-heated compounds or compounds with low viscosity. Mainly intended for the production of large size profiles or for rubber straining. High output capacity in relation to the diameter.
This kind of extruders can also be fed directly from the internal mixer.
| MODEL | Ø Screw | Screw speed | L/D | Motor power | Output | ||
| mm | rpm | kW (1) | kg/h | ||||
| EKC-60 | 60 | 65-90 | 6-8 | 11 | 18 | 70 | 190 |
| EKC-70 | 70 | 65-90 | 6-8 | 18 | 22 | 180 | 230 |
| EKC-90 | 90 | 65-90 | 6-8 | 22 | 37 | 450 | 600 |
| EKC-120 | 120 | 50-70 | 6-8 | 37 | 55 | 830 | 1200 |
| EKC-150 | 150 | 40-60 | 6-8 | 55 | 75 | 1350 | 2000 |
| EKC-160 | 160 | 40-60 | 6-8 | 75 | 90 | 1550 | 2200 |
| EKC-200 | 200 | 40-50 | 6-8 | 90 | 110 | 2200 | 3250 |
| EKC-250 | 250 | 30-40 | 6-8 | 110 | 132 | 3300 | 4650 |
| EKC-300 | 300 | 25-30 | 6-8 | 132 | 160 | 4250 | 6000 |